 |
Features
- This heavy duty after market replacement gear and sprocket assembly is for ALL 1984-current fail safe garage door chain operated openers from Liftmaster, Chamberlain, Craftsman, Sears, Master Mechanic and Wayne Dalton. Repair gear sets for openers made before 1984 are no longer available. If you just need to replace the main gear, please see part 41A2817-CR.
- This product comes with a tube of grease and is as shown. Easy to follow instructions click here Instructions not included with product.
- This Sears Craftsman Liftmaster heavy duty after market sprocket and main drive gear replacement kit part 41C4220CR is for all Chamberlain Group chain and belt drive openers manufactured from 1984 to present. If you just need the sprocket assembly and main drive gear, this is the most economical way to "refurbish" your garage door opener as this is the most common wear part in the opener drive system. This gear is the direct replacement part for the following garage door openers: Lift-Master, Sears Craftsman, Chamberlain, Master Mechanic and Garage Master. This is just one of many of our Sears Craftsman Liftmaster garage door parts that we have in stock and ready to ship. For a complete selection of Sears Craftsman Liftmaster garage door replacement parts, please select the Liftmaster or Sears Craftsman category at the left.
- Technical: Sprocket with the large, main gear has 32 teeth and is 2 3/4" x 1/2" wide, with a 1/2" bore (sizes are approximate). You MUST apply a low temperature lithium grease (included) to each tooth of the new gear or it will shred within days.
- Compatibility: Works with ALL 1/3 HP, 1/2 HP and 3/4 HP chain and belt drive garage door openers manufactured from 1984 to the present for these manufacturers: Liftmaster, Sears Craftsman, Chamberlain, Garage Master, Master Mechanic and Wayne Dalton. REPLACEMENT GEARS FOR LIFTMASTER CRAFTSMAN CHAMBERLAIN GARAGE DOOR OPENER MODELS MANUFACTURED PRIOR TO 1984 ARE NO LONGER AVAILABLE.
- Fits these Chamberlain Models: 1100, 1200, 2100, 2200, 4100, 4200, 4893OD, 5100, 6200, 710WHC, 711WHC, 7200, 7220, 7320, 7420, 7520D, 8100, 8100M, 8200, 9200, CG40, CG40D, CG42D, CSO, HD200D, HD600, PD100, PD200, PD210, PD210D, PD212, PD212D, PD600, PD610, PD610D, PD612K, PD612KLD, PD752, PD752D, PD758D, PD758S, WD822K, WD822KD, WD822KS, WD912K, WD912KS, WD922K.
- Raynor Navigator 2245RGD, Ultra 2595RGD, Endeavor 2585RGD, Aviator 2280RGD, Pilot 2265RGD. Also used for Wayne Dalton opener models 100 to 320.
- Fits these Liftmaster Models: 985, 1240, 1240R, 1245, 1245R, 1245LK, 1246, 1246R, 1250, 1255, 1255R, 1256, 1256R, 1260, 1260LK, 1265, 1270, 1280, 1280R, 1345, 1346, 1356, 215WD, 220WD, 2245, 2255, 2265, 2565, 2280, 2575, 2580, 2585, 2595, 315WD, 320WD, 3245, 3255, 3265, 3280, 3575, 3585, 3595, ATS211, ATS211R, ATS211X and ATS2113X.
- Fits these Sears Craftsman models: 139.53990, 139.53992, 139.53914, 139.53985, 139.53930, 139.5365, 139.53964, 139.53646, 139.53660, 139.53920, 139.53939, 139.184050, 139.18803, 139.18805, 139.18814, 139.18830, 139.53603, 139.53629SRT, 139.53629SRT1, 139.53674SRT2, 139.18850 and 139.18851. Only the most common models are listed here are listed here. If you don't see your Sears Craftsman garage door opener model listed here, please click here for our Sears Craftsman Garage Door Opener Gear Compatibility Chart. If you still don't see your model listed here, please email us and we will let you know which gear is compatible with your opener.
- Includes: 1 sprocket with shaft and replacement heavy duty main drive gears and 1 tube of low temperature lithium grease.
- Miscellaneous: If you need or wish to also replace the worm gear, please see part number 41C4220A.
Click here to read our How To Article on replacing your garage door opener gear
- If you have any questions or are unsure if this part will work with your garage door opener, please contact us.
Chain drive models only
|
|
|
How To Articles
