Wayne Dalton Torquemaster plus replacement spring

Home > Wayne Dalton >

Wayne Dalton Torquemaster Plus Replacement Garage Door Spring

Wayne Dalton Replacement Garage Door Spring

Wayne Dalton Garage Door Replacement Spring

Alternative Views:

The prices are $49.99 each for single spring doors and $89.99 for a pair. The Star Door Parts staff will ship you the exact replacement Torquemaster part by the options you enter below.

List Price: $59.99
Our Price: $49.99
You save $10.00!

Availability:: Usually Ships in 1 to 2 Business Days
Product Code: TM PLUS

Garage Door Width*:
Garage Door Height*:
Garage Door Balance Weight*:
Single or Double Spring System*:
Right or Left Spring*:

Description

Technical Specs

Extended Information

Wayne Dalton Torquemaster Plus Replacement Spring Assembly

Features

You can find most of the Torquemaster ordering information you need to complete the options in the drop down on the label located on the left side of your garage door spring tube. Sometimes the weight appears as WT. See photo example above. All information must be completed in the options area in order to process and prevent delays. If for some reason any of this information is missing we recommend sending us an e-mail using the contact us tab. Please include your garage door width, height, thickness, model number and if your door has windows or not. If you can not find your model number please e-mail us; a couple photos of the inside of your garage door to help us quickly identify your door and we will get back with the information you need to place your order.

It is very important to match the winding end of your spring up to the photo of the product. Note the end is octagon-shaped. Typically this spring will be found on doors manufactured after February 2007. If you have an end that is rounded and has external splines (this winding end may be made up of metal (as shown on the Original Spring page - use link below) and can also be of molded plastic (white, black or clear) you need to order the original Torquemaster model. Click here to order the Torquemaster Original spring.

We always recommend replacing springs in pairs (where applicable) due to spring having equal cycle life and the opposite spring will most likely also fail soon leaving your door inoperable again and costing you additional money and freight.

The Torquemaster springs you will receive will not always match your old springs length due to the switch from an oil tempered spring to a new high tensile strength music wire spring. In many cases the spring will be considerably shorter or slightly longer. That it is why it is very important for you to fill in all the fields on the order for to assure you receive the proper springs for your door.

If you have difficulty removing your broken spring from the tube you can use a series of wooden dowel (purchased at any hardware store) and a hammer to drive out old spring parts that may be lodged in the tube. Make sure the wooden dowels are as close to the inner diameter of the spring tube size as possible.

Click here to download the Wayne Dalton Torquemaster Installation Instructions.

Torquemaster springs can only be shipped FedEx ground.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Wayne Dalton
Wayne Dalton > Torquemaster Parts
Torquemaster Springs


Wayne Dalton 325687 Gear Drive Coupling for Belt Drive Openers	Wayne Dalton Remote Control Transmitter 372 MHz	Wayne Dalton Part 252118 Safety Beam Set	Wayne Dalton Spring Tube Bracket
$34.79	$26.79	$49.99	$11.95

StarDoorParts \| Garage Door & Opener Parts, Torsion & Torquemaster Springs