 |
 |
 |
|
If you own a Wayne Dalton garage door and are in need of new weather stripping for you garage door, Star Door Parts has the products that you need. We only sell genuine Wayne Dalton garage door bottom seal that conforms to uneven floors. Not only does it save you money by reducing energy loss all year but it also installs quickly and easily. Please note our weather seal is sold by the foot.
****Please note, when ordering, please click to add the item to the cart, (it will show as Qty = 1) then update the quantity to reflect the number of feet that you need, and recalculate the order.
NEED A SAMPLE?
Order p/n 154448-SAMPLE, to receive a 3" sample, shipped via first class mail for $2.99.
How to Easily Replace the Bottom Weather Seal on Your Garage Door
- Start by removing the existing weather strip gasket (you may also need to replace the
bracket if necessary) using a Philips or standard screwdriver to remove the existing screws. Be careful not to dent or damage the steel garage door panels or to scratch the wood garage door panels.
- Next, raise the garage door to a comfortable work height for you to
take your measurements. Start by measuring the length of the garage door.
Add 1" for each side to allow for any adjustments needed to be made. Measure the width of
the bottom of the door and the width of the existing garage door gasket (if possible). Do not remove the existing bottom weather seal until you have purchased a
replacement gasket!
- Now trim any excess length
of the bottom seal gasket with a utility knife. Make sure you don't damage
the surface of the garage door when trimming the excess gasket. Also, don't let the
gasket interfere with the raising and lowering of the garage door. You will want to verify this before you continue. - An alternate method, if you ordered an extra foot of bottom seal, is to leave 4" - 6" of bottom seal protruding on each end, spray with a lubricant, and using a wooden dowel or stick, carefully tuck it back in upon itself, between the door bottom and the seal. This will allow for thermal contraction & expansion, eliminating the potential of a gap at each end of the door.
- Finally, test the new garage door gasket seal by lowering the door and checking for a continuous seal along the bottom of the garage door & any clearance issues with the door track or cables.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Genuine Wayne Dalton Residential Rubber Seal Part # 154448 for most Wayne Dalton garage door models. This is not an aftermarket product but the genuine Wayne Dalton weather seal installed on new garage doors. Please note that our weather seal is sold by the foot . The quantity entered above should equal the length of the seal that you need. We recommend buying one extra foot longer than the width of the door, then tuck the extra 4"-6" on each end back in on top of itself for a nice clean installation, and it allows for expansion and contraction.
Tip, if your weather seal is a bit distorted or unruly when you receive it, try placing it in a bucket of hot water for 10-15 minutes. This will make it much more pliable for installation.
Spray or wipe the bottom seal with silicone, once it is installed. This will help prevent the garage door from freezing to the garage floor, and causing costly damage to your garage door or operator.
Technical
- Measure 3-1/4" across and bead that slides into retainer is approx 5/32"
- 3-1/4" bead width
- Conforms to uneven floors
- Contact insures tight seal
- Installs quickly and easily in just minutes
Compatibility
- Designed for Wayne Dalton residential garage doors
- Fits 8000 and 9000 series steel doors
- Designed for Thermaguard, Foamcore, and Thermawayne style doors
- Works with most of the following Wayne Dalton door models: FCII, 8000, 8100, 8200, 9100, 9400, 9600, 9700, 9800, 2411, 2415, TS125, TG, TW and many others.
Includes
Genuine Wayne Dalton black bottom seal for Wayne Dalton garage doors
(Reminder: sold per foot)
|
|
|
|
|
|
| Customers who purchased this also purchased... |
|
|
|
|
weather seal 
