• Gray in color measures 4" across when placed flat.
• Works with most Midland brand Garage Doors
• 3" sample shipped via first class mail.

How to Easily Replace the Bottom Weather Seal on Your Garage Door

• Start by removing the existing weather strip gasket (you may also need to replace the bracket if necessary) using a Philips or standard screwdriver to remove the existing screws. Be careful not to dent or damage the steel garage door panels or to scratch the wood garage door panels.
• Next, raise the garage door to a comfortable work height for you to take your measurements. Start by measuring the length of the garage door. Add 1" for each side to allow for any adjustments needed to be made. Measure the width of the bottom of the door and the width of the existing garage door gasket (if possible). Do not remove the existing bottom weather seal until you have purchased a replacement gasket!
• Now trim any excess length of the bottom seal gasket with a utility knife. Make sure you don't damage the surface of the garage door when trimming the excess gasket. Also, don't let the gasket interfere with the raising and lowering of the garage door. You will want to verify this before you continue.
• Finally, test the new garage door gasket seal by lowering the door and checking for a continuous seal along the bottom of the garage door.