This newly designed remote is compatible with the Genie Intellicode 1 versions also known as the series II control system as well as the new Intellicode 2 system introduced in 2011.
Each button can be individually set for either the Intellicode 1 mode or the Intellicode 2 mode. The remote includes programming instructions on how to change the mode of the individual button from Intellicode 2 (factory default) mode to the Intellicode 1 mode. Once each of the button are set to the correct mode for the device it is to operate, it then needs to be added to the door opener or radio receivers memory.
Will not work on garage door openers or gate receivers that use the older code switch type remotes or the original Intellicode system manufactured prior to 1997.
Controls up to three garage door openers or gate radio receivers. The remote measures a small 2-1/2 inches by 1-3/4 inches and can be clipped onto a key chain or used with the included visor clip. The G3T-BX remote is a dual frequency remote that sends both 390 MHz and 315 MHz frequencies to the receiver.
Compatibility: This remote replaces the following Genie remotes: •GIT-1 •GIT-2 •GIT-3 •ACSCTG Type 1 •ACSCTG Type 2 •ACSCTG Type 3 •TBSTG •GIC90-1 •GMIC90-3 •GIC90-2 •GMIC-3BL •GIC90-3 •OCDT-1 •OCDT-2 •OCDT-3 •G2T-1 •G2T-2 •G2T-3 •GICTD-1 •GICT390-1 •GIFT390-1 •GIT390-4. Not all compatible models may be listed. Not compatible with the old code switch system or pre-1997 Intellicode systems.
Same as part numbers: 622, OCDT3, 37503S, 37504S, 1704, 1703, OHDT390-BX3
Includes: 1 original Genie Intellicode II 3-button G3T-BX remote, programming instructions, visor clip and battery. Comes with a 1 year manufacturer warranty.