21 inch Genie Overhead Door Operator Drawbar Reinforcement Plate

Features
This center operator drawbar bracket serves to reinforce the area of your garage door that the operator is pulling or pushing on to open and close the sectional garage door.
This drawbar reinforcement bracket, is designed to be used with Overhead Door/Genie p/n 19792B operator trolley arm attachment bracket.
Trolley arm attachment bracket is not included, order separately.

Technical: Operator Drawbar Reinforcement Bracket is 15-7/8" Long.

Body is 2-3/8" x 1/2" Thick Flange, 1/16" T, 16 gauge galvanized steel.

2 - 1/4" Diameter mounting holes on each end, 1-1/2" on center.

4 - 3/16" Diameter holes to accept operator arm attachment bracket p/n 19792B, are
3" on center vertically & 1-1/2" on center horizontally.

Heavy Duty 16 Gauge zinc plated Steel. Used on 18" sections.

Universal applications

Can be used on most 19" garage door section to repair or reinforce operator attachment point or repair damaged stiles.

Quick Links

About Us

Contact Us