Features
The Linear Mega Code MCT-11 (DNT00090), is a single channel, one-button visor garage door or
automatic gate remote control is designed for use with Linear's Mega Code
series of receivers. The transmitter button will send a
unique code when pressed and is used to activate the
Linear garage door opener. Programming is done by pressing the learn button on the receiver then
just press the button on the remote.
The transmitter is powered by two type 2032 coin-cell batteries. They
should last 3 years with normal use. The red indicator on the face of
the transmitter will glow when the unit is activated. If the indicator
lights dimly, or not at all when transmitting, the batteries need to be
replaced. To conserve battery life, an internal timer limits the
transmission duration to 10 seconds if the transmitter button is held
down.
Compatibility
The Linear MCT-11 is compatible with the following Linear Mega Code
Receivers: MDR, MDR-U, MDR-2, MDRG, MDRM, MGR, MGR-2, and SMDRG. It is compatible with all 318MHz Linear access receivers and controllers. RF
frequency: 318 MHz. Factory programmed MegaCode format supports over
1,000,000 codes.
The MCT-11 is also directly compatible with the Linear LD033, LD050,
LS050, LC075, LDCO800, LSO50, and LSO50-2T garage door openers.
Includes
Linear MCT-11(DNT00090) remote transmitter, two type 2032 coin-cell batteries, visor clip and programming instruction. Comes with a one year manufacturer warranty.
|
